Suitable for joints where you need a larger load, angle of ribs.
S250GD + Z275 according to DIN EN10346
275 g / m galvanized on both sides 20mm
• High levels of load in three directions
• optimized use of nails needed to install
• suitable for connection to the concrete
Wood, wood products, concrete, steel
• For connections of intersecting beams, purlins and rafters joint, as a substitute for a joist hanger, upper nail 160 mm, concrete screw M10
Values for joint wood and wood, two connections
** Choose the largest number of nails for combined loads
*** R4 / 5 s b> e 60 mm and <90 mm. For further dimensions b and e, viz. ETA
**** R4 / 5 with b> 60 mm and e <150 mm. For further dimensions b and e, viz.ETA
Values for wood and concrete joint, two connecting
Screws are sold separately.
Load for each pair of screws at an angle are: