Stainless connectors
Loading ...
-
No dimple-ribs, stainless steel (70 90 105)
AB-S
They are suitable for joints in load-bearing wood construction. In the case of increased demands on load capacity, we recommend using the crease. AB angle is suitable as connecting means for the conne... -
-
AB55365S - stainless steel bracket
AB55365S
Suitable for joining wood to wood or wood-concrete joints, for uniform load is recommended to use two brackets on each linkView the product -
ABB40390S
ABB40390S
Stainless steel bracket 40390 Widely used, particularly where there are no demands for high loads. -
-
Angle ABR70,90,105 Embossed
ABR-S
Suitable for connections where there is a large load angles are provided with ribs DoP: DE-DoP-E06 / 0106 -
-
Stainless Steel Bracket
ABR-S
The ABR angle brackets with rib can be used in high loaded timber structures. These brackets are made of stainless steel and are recommended in aggressive atmospheres -
-
Stainless steel frame bracket (100S)
ABR-S
The ABR100S is reinforced bracket which responds to structural applications on a wooden support or concrete. This bracket is recommended in aggressive atmospheres. -
-
AC35350S - stainless steel bracket
AC35350S
For uniform load is recommended to use two angles for each joint. Combination wood / wood or wood / construction jointsView the product -
AKR stainless steel bracket
AKRS
These brackets allow optimum connection between wood and other building materials such as concrete and steel. This is an economic connections that can be used in many areas. AKR and AKR-L will vary sc... -
-
ANP-structural angles of stainless steel perforated sheets (2.5 mm)
ANP256660S
The thickness of these plates is 3 mm. These angles are suitable for various types of transitions between the wood connection. E.g. Sleeper connection props etc. DoP: DE-DoP-E06 / 0106 -
-
Stainless steel bracing tape BAN
BAN-S
BAN bracing strips are used in roof constructions as drawbar. -
-
X-shaped perforated stainless steel tape BAN
BAN-S
These tapes are used for anchoring the timber in the low load range and as a structural connection. -
-
Beam stainless steel shoe BSN
BSN-S
These ceiling drapes are used to connect a secondary beam to the main support or support. -
-
Corrugated stainless steel spikes
CNA-S
The corrugated stainless steel spikes NAC-S are recommended for structural assemblies Simpson Strong-Tie connectors. All our tests were carried out with this type of points. For traceability on constr... -
-
Screws for Torx head connectors - Stainless steel
CSA-S
The stainless steel Torx screw complements the galvanized range. It is suitable for corrosive atmospheres and must be used only with stainless steel connectors. -
-
Adjustable angle brackets
EFIXS
EFIXS angle brackets are intended for all assemblies for the design and installation of interior and exterior joinery. EFIXS can also be installed in the corner or on the corner.View the product -
Gerber clutch GERW stainless steel
GERW-S
Connectors Gerwe are suitable for common gripping girders. Moreover, transverse forces in the vertical direction can absorb forces in the direction of the beam, and are therefore suitable for redirec... -
-
- no_product_filter.error
